Your Buhler curio cabinet is equipped
with glass shelves and shelf supports that meet our strict quality
assurance.The glass shelf supports are designed to fit securely into
the pre-drilled holes in the inside gable of the curio cabinet.
1) Install shelf supports in the pre-drilled holes at desired levels.
Ensure that the shelf supports are fully ‘Seated’ in
the holes.
2) Carefully place glass shelves into the curio cabinet, starting
with the top shelf. Ensure that all four corners of the glass shelf
rest securely on each of the four* shelf supports.
*Some curio cabinets require a fifth support in the centre span
of the glass shelf. If pre-drilled hole is
present, each shelf must be supported at that point.
3) If the shelf supports or glass shelves have been damaged, contact
your dealer immediately.
Note: Before loading glass shelves with personal belongings, ensure
that the glass shelves are secure and properly supported.
Do not substitute shelf supports or glass shelves in your Buhler
curio cabinet without approval from your dealer.
Improper installation of glass shelves and shelf supports may jeopardize
structural integrity.
•
The glass shelving used in this product is manufactured of premium
quality plate
glass or float plate glass.However, there are no industry nor governmental
standards
which specify the supporting load limit for glass shelving.
•
To prevent breakage of shelves and articles placed on them, good
judgment must be exercised.Take care in placing heavy items or
a large number of items on any one shelf.
•
A sudden shock, even from a small item dropped on the shelf, can
result in breakage of the shelf, and possibly other shelves and
articles that are positioned beneath.
•
Personal injury from broken glass and loss of treasured articles
can result from overloading
of glass shelving.
The end use of this item is beyond our control, therefore Buhler
cannot be responsible for broken glass shelving nor damage to personal articles.
|